Which building constructions are mainly suitable for the space frame

Can the space frame processing drawings be optimized?

The answer is yes, but it must follow the principles of science, standardization, and flow. Architectural design institutes generally pay more attention to the overall safety of the steel structure space frame when processing the design plan, and may pay less attention to the details of the processing. This is the area where we need to optimize the plan. The general steel structure space frame can also optimize the area of the plan as follows:

1. The rationality of the space frame size and the sagging height, such as: 2m space frame size and 2.5m height are unreasonable, it can not be said that his design is wrong, but the design results are large Ball, resulting in a large number of bolt balls, thereby increasing the cost and reducing the aesthetics. This result is more prominent when there are side stringers.

2. Today’s space frame design software is becoming more and more intelligent, but it is also possible to simply design a combination of bolt balls and solder balls, but the industry knows that solder balls will greatly increase installation costs and even affect time constraints. In fact, most welding balls can also be converted into bolt balls by adjusting the angle.

3. The optimization plan of the space frame material, it is recommended not to use Q345B material lightly. Q345B may save a little steel, but the cost of accessories is greatly increased, and the difficulty of procurement is greatly increased. In the end, the cost is increased and the construction period is affected.

4. The auxiliary components on the space frame are connected by bolts, not welded.

5. For some projects with small spans and simple working conditions, the need for customized support types is minimized. Finally, the optimization plan needs to be approved by the original design institute.
website：https://www.cnxzlf.com